Sean Teague
Member
Hello all.
I have a question about communication between my HMI and processor.
Somehow, one of our maintenance techs goofed up the program.
We have a PanelView Plus Compact 1000 and a L27ERM Compact Logix Controller.
The Panelview firmware is v5.10.16 and the processor is 21.11
Everything on the screen that is supposed to be data from the PLC says "error"
I have tried to "redo" the communication path from the HMI to the PLC through the comm settings in FT View, but i cannot get it to work, and from what i have been reading on here, these 2 units are supposedly incompatible...but they were working together flawlessly for several years.
Any help would be greatly appreciated!
I have a question about communication between my HMI and processor.
Somehow, one of our maintenance techs goofed up the program.
We have a PanelView Plus Compact 1000 and a L27ERM Compact Logix Controller.
The Panelview firmware is v5.10.16 and the processor is 21.11
Everything on the screen that is supposed to be data from the PLC says "error"
I have tried to "redo" the communication path from the HMI to the PLC through the comm settings in FT View, but i cannot get it to work, and from what i have been reading on here, these 2 units are supposedly incompatible...but they were working together flawlessly for several years.
Any help would be greatly appreciated!