I have found that when a Momentary Push button is pressed when the power is shut off to the PanelView and CompactLogix controller. After power is restored and everythings comes back up. After resetting the MCR the Button says latched in and the motor is running. The tag for this button is only used in one place.
The version for the PanelView Pluss 700 is 8.20
And the firmware version for the L18 is 20.019
Does anyone know how I can resolve the momentary pushbutton tag to go false before the MCR is reset?
Thank you,
Dave
The version for the PanelView Pluss 700 is 8.20
And the firmware version for the L18 is 20.019
Does anyone know how I can resolve the momentary pushbutton tag to go false before the MCR is reset?
Thank you,
Dave