PanelView Plus 7

YellowRobot

Member
Y
Join Date
Dec 2023
Location
East Coast
Posts
4
Hello everyone. This is more of an HMI issue. I have a new PanelView Plus 7 Series B. I am using the alarm list object to display the fault history. This is working as it should. The issue I am seeing is that the faults are disappearing after several hours without being manually cleared. They are being logged and displayed correctly and the max number of alarm entries is set to 1000, but they still disappear one by one after a few hours. Does anyone know if this is a known issue with the series b PanelView?
 

Similar Topics

D
Panelview 1000e to Panelview plus 7 (std) conversion
I’m running short on time to complete this project (retirement looming), so thought I’d ask here hopefully save me some research time. I’m...
Replies
8
Views
155
dalem
D
C
Panelview Plus 7 Help
I've adjusted the IP of the Panelview Plus as well as the DNS servers; the screen does not show up in the search when I go to the transfer utility...
Replies
7
Views
198
chall234
C
S
A&B Panelview plus 7
Replaced overlay and glass in HMI but now I can not calibrate the touch screen any suggestions.
Replies
1
Views
93
arpus4KM
A
S
Panelview Plus 7 Std Series D - Screen Navigation Issues
I'm at a loss here and hoping someone else has seen this: Background: We've got two identical machines on our floor (we'll call them machine A &...
Replies
0
Views
94
Super Steve
S
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
147
jscampbell210
J
Back
Top Bottom