RY_Guthrie
Member
I may have to load an exsiting program from a memory card from a panelview 900 into a panelview 1000, will I run into any road blocks? they are both color, and touch screens.
panelview
- Thread starter RY_Guthrie
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
You can't do it without converting the program from a model 900 to a model 1000. This takes a few seconds in PanelBuilder32.
If you don't have PanelBuilder32, post your *.PVA file and the exact part number and firmware revision of the target terminal, and a Forum member can do it for you.
If you don't have PanelBuilder32, post your *.PVA file and the exact part number and firmware revision of the target terminal, and a Forum member can do it for you.
Similar Topics
Replaced overlay and glass in HMI but now I can not calibrate the touch screen any suggestions.
i have 2 backups:
*.PVC and *.pvd file types
thanks in advance for any help
I'm at a loss here and hoping someone else has seen this:
Background:
We've got two identical machines on our floor (we'll call them machine A &...
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Hi Everyone,
Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...