Lisa3003Lisa
Member
I'm using FactoryTalk ME version 13. I'm aware how to pass a parameter file once, but I was wondering if it is possible to do it twice.
Scenario:
I have multiple I/O racks, and each rack has a different number of slots. My idea was to have a Go To button for each rack with a parameter list with {[PLC]Rack1}, {[PLC]Rack2}, etc. All of those Go To buttons would go to the same display, which would have a Go To button for each slot that the selected rack has. Within those slot Go To buttons I wanted to put another parameter list, like {[PLC]#1.Slot1} or #1.{[PLC]Slot1}.
However, I'm not sure if it is possible as I have not had a success.
Scenario:
I have multiple I/O racks, and each rack has a different number of slots. My idea was to have a Go To button for each rack with a parameter list with {[PLC]Rack1}, {[PLC]Rack2}, etc. All of those Go To buttons would go to the same display, which would have a Go To button for each slot that the selected rack has. Within those slot Go To buttons I wanted to put another parameter list, like {[PLC]#1.Slot1} or #1.{[PLC]Slot1}.
However, I'm not sure if it is possible as I have not had a success.