I have project where i connect a flowmeter to redlion PAXI with PAXCDC10 card.
Can someone give me an example MODBUS string that I can use to test.
Even if it only returns a zero, then I'll know that I have communication to the device.
I'm currently using RealTerm as my testing software.
Assuming that my slave ID =1, can you supply me an example string ?
I have tried:
01 04 9C 41 00 01 CRC CRC (9C41=40001)
01 04 00 01 00 01 CRC CRC
but I'm not getting any reply from the device.
I've verified my baud rate, start/stop bits also.
If anyone can give me some explanations i'll bee grateful .
Thanks in advance
Can someone give me an example MODBUS string that I can use to test.
Even if it only returns a zero, then I'll know that I have communication to the device.
I'm currently using RealTerm as my testing software.
Assuming that my slave ID =1, can you supply me an example string ?
I have tried:
01 04 9C 41 00 01 CRC CRC (9C41=40001)
01 04 00 01 00 01 CRC CRC
but I'm not getting any reply from the device.
I've verified my baud rate, start/stop bits also.
If anyone can give me some explanations i'll bee grateful .
Thanks in advance
