abdennnour
Member
I am using a plc s7 200 cpu 226 to drive a machine. on one of the input,is placed an encoder, which gives impulses at a certain frequency. the encoder works well but if the frequency of the impulses is hight , the couter in the plc does not respond
hiere is the program in list
LD I0.0
LD I0.1
CTU C0, 1000
I could not copy it in lad
hiere is the program in list
LD I0.0
LD I0.1
CTU C0, 1000
I could not copy it in lad