Phonenumber Siemens US

Hello Leonardo;

In the States, distribution is not handled directly by Siemens Energy and Automation (SEA), but given to distributors.

Here is a list of authorised distributors that you can look at; some of them have branches in California you could contact.

http://www.sourceesb.com/Distributors/Siemens-Energy-Automation-Distribution.asp

On the other hand, if you need to speak with SEA directly, here are their coordinates:

http://www2.sea.siemens.com/Home#loop
Corporate Headquarters
3333 Old Milton Parkway

Alpharetta, GA 30005


Telephone: 800-964-4114

 

Similar Topics

Hello, I have a CPU 317-2DP Firmware Version V2.1.8. In TIA Portal only V2.6 is available, and there is no option to upgrade FW. Then I open it...
Replies
2
Views
97
HI everyone, i am new to Siemens plc programming and i am in need of some help. yesterday we had an S7-1200 CPU 1214C fail to turn on an output to...
Replies
9
Views
291
Hi PLC people, think about this scenario: The PLC is somehow connected to the same network with the facilities` network. Then someone connects to...
Replies
2
Views
105
Hello everyone, I've had this issue for the last 2 days where I try to assign the profisafe address to an IO block (6ES7 146-6FF00-0AB0) but when...
Replies
5
Views
159
Hello, good morning, I have been having two problems with the Tia Portal software. The first is that I have installed it on my computer and...
Replies
5
Views
197
Back
Top Bottom