PLC 2/16 communication cabe and required software

kodaic

Member
K
Join Date
Sep 2005
Location
India
Posts
1
Dear All,

I m having plc 2/16 cpu and i m having RS logix 5 how to go online with the cpu .
The cpu is having 15 pin female connector
 
kodaic said:
I'm having plc 2/16 cpu and i m having RS logix 5 how to go online with the cpu .
Click to expand...
Ain't gonna happen. RSLogix5 is for programming the PLC-5 family. You need AI for the 2 or UPDOC with a cableized dongle.
 

Similar Topics

A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
132
mk42
M
A
WinCC Unified and PLC weird communication issue
I have created a project in TIA Portal v16 Upd6 with S7-1200 (6ES7214-1AG40-0XB0) and WinCC Unified (PC station). The communication between the...
Replies
4
Views
154
mk42
M
H
No communication with PLC 90-70
Hello We have installed several G.E. Fanuc 90 70 PLC Everything was ok but suddenly we can not communicate anymore with any PLC with the software...
Replies
0
Views
81
Hazatov
H
Voltimus
IDEC PLC to PLC modbus communication
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
Replies
0
Views
94
Voltimus
Voltimus
Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
131
yawin
Y
Back
Top Bottom