I need to add an analog input to this legacy plc 2/17 system.
I placed the module in the very last slot of an 8 slot
chassi, next to an on board power supply. I have the card jumpers set for Differential current. I have the block transfers in place. I have current flow from my field sensor verified with my meter. I have tried every method I know of programming the btr and btw, even the method with the FFM. I get no data into the PLC. Any ideas I'm out of them
not sure what to do at this point
I placed the module in the very last slot of an 8 slot
chassi, next to an on board power supply. I have the card jumpers set for Differential current. I have the block transfers in place. I have current flow from my field sensor verified with my meter. I have tried every method I know of programming the btr and btw, even the method with the FFM. I get no data into the PLC. Any ideas I'm out of them
not sure what to do at this point