James_Newman
Member
Hi
I have a PLC 5/40E which passes speeds to a number of machines via rio.
Currently there is no scaling and the machines use look up tables for different speeds. These values are different for each machine.
I would like to add a SCP for each machine so I can get a units per minute sent to each machine to get some kind off usable values.
I know there is no SCP instruction with in the 5/40E
Does any one have an example of the logic needed to do this.
Thanks
I have a PLC 5/40E which passes speeds to a number of machines via rio.
Currently there is no scaling and the machines use look up tables for different speeds. These values are different for each machine.
I would like to add a SCP for each machine so I can get a units per minute sent to each machine to get some kind off usable values.
I know there is no SCP instruction with in the 5/40E
Does any one have an example of the logic needed to do this.
Thanks