PLC 5 stuck in Run mode

[Controls_Engineer79]

lol oh snap

i think i just got smacked down

hey its not my fault i filled out this profile at 2am

 

[BOOTLOADER]

please people ..... stick with the opject ....just tell us the solution of this problem if u know it.

 

[freddofrog]

I have had the keyswitch go flaky in a SLC, so that might be the problem.
quote]

yes i had this problem with an SLC too, switch just stopped working, had to replace the whole processor.

 

[Shivan]

Hey guys i have had another go with my only-run-mode PLC 5/40.

I connected threw the serial, still in run mode.
I switched the keyswitch in every order possible, still in run mode
Turned it off and on, still in run mode
Checked for errors, none
Checked the code for S:, nothing in the code
Checked the incoming messages, nothing to do with S:
Tryed to download a new progrm, declined "im in run mode"
Loaded the code into a spare processor, works fine

To me this is a bung processor

My only other option is pull the power and battery and clear the memory which holds the risk of not being able to reinstall the program.

Bung processor = replace processor

Thanks Guys for the help