Hi. I just got an assignment to write a graphical user interface for Unitronics Vision 120. I chose to code it in C# because its the language that i'm most familiar with.
GUI should show several values (from PLC) on the CPU screen in realtime. Unitronics has written a software called Remote Access which is quite similar to the solution that I need to write.
For now I have tested KineticaRT and Local IO which are both shareware. It would be very useful if anyone could reccommend me a free library or a good documentation which explains how to write it without library.
I'am a newbie in the world of PLC's so I was wondering if anyone has done anything like that before and could give me some tips.
Henry
GUI should show several values (from PLC) on the CPU screen in realtime. Unitronics has written a software called Remote Access which is quite similar to the solution that I need to write.
For now I have tested KineticaRT and Local IO which are both shareware. It would be very useful if anyone could reccommend me a free library or a good documentation which explains how to write it without library.
I'am a newbie in the world of PLC's so I was wondering if anyone has done anything like that before and could give me some tips.
Henry