Load cell I am attempting to use and application
I am getting back to a programming a scale system that doesn’t work as sold to our customers. The individual that created this has left our company to pursue other interests. I am using the Hardy load cell with C2 calibration along with the HI 1746-WS Weigh Scale Module for the SLC 500. http://www.hardyinst.com/
Our customers are experiencing weight drift (Not sure about this) and erratic machine behavior (I believe this to be programming).
The scale is in a cold wet environment on a piece of equipment that is filling food containers.
Bob
I am getting back to a programming a scale system that doesn’t work as sold to our customers. The individual that created this has left our company to pursue other interests. I am using the Hardy load cell with C2 calibration along with the HI 1746-WS Weigh Scale Module for the SLC 500. http://www.hardyinst.com/
Our customers are experiencing weight drift (Not sure about this) and erratic machine behavior (I believe this to be programming).
The scale is in a cold wet environment on a piece of equipment that is filling food containers.
Bob
Last edited: