I am completely new to PLCs and was given the task of figuring out all the components needed, and to buy a panel accordingly. These are the components that I know I already have:
- Allen Bradley Micrologix 1200 PLC
1762L40BXB ABS 24 in 24VDC 16out Relay 24 VDC Power
- Allen Bradley Power Supply
1606-XL120D AB 24VDC 5AMP
- Allen Bradley Panelview 300
The input power to the system is 480V 3-phase. I have 14 digital inputs at 24V each. I also have 10 digital outputs at 110V each. I understand I will need relays for these outputs. Additionally, I know I'll need some sort of motor starter for a hydraulic pump that runs off of house power (480 3ph).
I'm looking for any advice as to what components such as relays, fuses, safety modules, motor starters, terminal blocks, etc that I will need. Finally, I need suggestions as to where I might purchase these components.
Thank you.
- Allen Bradley Micrologix 1200 PLC
1762L40BXB ABS 24 in 24VDC 16out Relay 24 VDC Power
- Allen Bradley Power Supply
1606-XL120D AB 24VDC 5AMP
- Allen Bradley Panelview 300
The input power to the system is 480V 3-phase. I have 14 digital inputs at 24V each. I also have 10 digital outputs at 110V each. I understand I will need relays for these outputs. Additionally, I know I'll need some sort of motor starter for a hydraulic pump that runs off of house power (480 3ph).
I'm looking for any advice as to what components such as relays, fuses, safety modules, motor starters, terminal blocks, etc that I will need. Finally, I need suggestions as to where I might purchase these components.
Thank you.