PLC S7 NTP Time Sync and Server

userxyz

Member
U
Join Date
May 2002
Location
any
Posts
2,768
All my PLC's should synchronize time and date with a time server (PC). I did this by using NTP sync in the HWconfig. This works, but, there is allways one hour difference. The PLC time is one hour further then the time it should be from the PC. I remember that I had similar problems a few years ago and I had to check the regional settings... these are set on Belgium...

What can I do to correct this ?
 

Similar Topics

I
Control Logix Redundant PLC System NTP Sync AOI
Hi sir. We are using Control logix redundant PLC system which supports only PTP time synchronization protocol but from DCS side we are receiving...
Replies
1
Views
2,440
harryting
H
J
Siemens NTP sync PLC VS. HMI
Hey guys, am I over looking something here? I have my Siemens PLC's (300's) synced with a NTP server. The PLC gets the UTC time from the server...
Replies
2
Views
5,598
JOLTRON
J
S
PLC and NTP
Hi, Are PLC to use the NTP protocols suite. I find very few information about PLC & NTP. Thanks a lot.
Replies
1
Views
3,076
Contr_Conn
Contr_Conn
D
modelling old RR relays in PLC
Hi all, looking to model old RR relays in PLC. Does anyone have any SPECIFIC examples on how to model a relay such as a polar relay, slow pickup...
Replies
0
Views
3
dak4482
D
K
Software for Hitachi PLC (EH series)
HelloI need software to download the program from PLC EH-A28DRP from an old machine whose manufacturer does not exist. It may be Ladder Editor for...
Replies
0
Views
23
krzysztof4n
K
Back
Top Bottom