I am new here. I just find the PLC forum site these days. I have some problem when we upgrade our equipment from PLC5 to RSLogix 5000 V20.014.
Our current SCADA is ifix3.0 base. The RSLinx is V2.43. The SCADA can read the data from Allen Bradley ControlLogix 5000 V13.03.00 plc. But the SCADA can not read data from newer AB ControlLogix 5000 V20 PLC.
We try to upgrade RSLinx to V2.59.01 CPR9 SR5. RSLinx can communicate with both ControlLogix 5000 V13.03.00 PLC and ControlLogix 5000 V20.01.00 CPR9 SR5.
But the SCADA can not communicate with both PLCs with newer RSLinx Version 2.59.02
The SCADA we use is ifix 3.0. The ABR power tool in ifix 3.0 is "ABRdrv OLE automatic I/O drive version 7.29g". Do I need to upgrade ABR power tool? or some other one?
I appreciate if someone who experts in ifix 3.0, ABR power tool and ControlLogix 5.0 can help on this issue.
Our current SCADA is ifix3.0 base. The RSLinx is V2.43. The SCADA can read the data from Allen Bradley ControlLogix 5000 V13.03.00 plc. But the SCADA can not read data from newer AB ControlLogix 5000 V20 PLC.
We try to upgrade RSLinx to V2.59.01 CPR9 SR5. RSLinx can communicate with both ControlLogix 5000 V13.03.00 PLC and ControlLogix 5000 V20.01.00 CPR9 SR5.
But the SCADA can not communicate with both PLCs with newer RSLinx Version 2.59.02
The SCADA we use is ifix 3.0. The ABR power tool in ifix 3.0 is "ABRdrv OLE automatic I/O drive version 7.29g". Do I need to upgrade ABR power tool? or some other one?
I appreciate if someone who experts in ifix 3.0, ABR power tool and ControlLogix 5.0 can help on this issue.