plc's

[02bnden04]

future trends in plc's

 

[Tom Jenkins]

I didn't realize Phil's charge per word had risen to the point that complete sentences and actual questions were cost prohibitive!

 

[bernie_carlton]

YES, I do think there will be trends in PLCs in the future.

 

[Goody]

I think future trends with plc's is for a black or dark grey colour.
I would like some bright blue or red ones. They would stand out in the panel. Maybe even some customised silver ones to show off with.

 

[glaverty]

I'm hoping for a cloaking device to hide the units from people who shouldn't be messing with them.

 

[Allen Nelson]

YES, I do think there will be trends in PLCs in the future.

Bernie:

02bnden04 is asking about FUTURE trends. I don't think it's possible to trend the future. If I could, I'd trend the Powerball numbers into next week....

 

[glaverty]

Goody,

I just noticed your avitar. Do PLC's you regularly work on burst into flame?

 

[Goody]

Do PLC's you regularly work on burst into flame?

I have been a controls engineer/elec-tech for many years. I have an enquiring mind. With those two qualities, there isnt much I havnt blown up or destroyed at one time or other.

 

[john paley]

When the heck did "Future Trends" come out with a PLC???? Is it worth a s**t???

 

[iknowsomeplc]

Future is SoftPLCs with Control and Informaton tightly integrated with safety. Also I see the centralized control architecture will be replaced with distributed control architecture with all self-thinking smart end devices .. Of course everything will be information rich with embedded web servers . Connect to any part of your control system and drill down to any parameter and watch/control from anywhere in the planet, just by using a plam top or cell phone !

 

[chakorules]

Didn't you guys know your suppose to highlight the last part of the paragraph of the original poster to reveal a hidden message

Try here:
Click mouse down, hold and drag to->>>>


plcs will be the future for all automation, it will take a long time for pc based control to overtake the smaller automation machines!


<<<<<----
Now try it again at the original message, see if there is a hidden message.

 

[rsdoran]

there is a future?

 

[kamenges]

To expand on Ron's point, is there really a future until it happens? And once it happens, isn't it the present or the past?

 

[Eric Nelson]

Face it... We're all doomed!...

beerchug

-Eric

 

[SAK-CO TECH]

Remember,

No matter where you go, there you are!!