respected sir,i want ur help,,
i got 4 floor model of an elevator,,,with 4 cabinet-call push buttons on each floor,,the problem i m facing is,,,i can't make ladder(program),,,to give priority,,i.e. for example suppose the cabinet
is at 3rd floor an is now called from ground floor,,
when it is travelling towards ground floor it is again called by 3rd floor first and then 2nd floor,,,,,,
so the sequence occur like this---cabinet goes to ground floor it
stays there for 10 sec,,,,then it should move up to 3rd floor ,,,,,
stops there for 10 sec,,,,,and finally comes to 2nd floor and stops..
please help me by sending your ladder diagram which take all this conditions in mind b'coz i m just bugged off thinking about this ,
plzzz
send as soon as possible
i got 4 floor model of an elevator,,,with 4 cabinet-call push buttons on each floor,,the problem i m facing is,,,i can't make ladder(program),,,to give priority,,i.e. for example suppose the cabinet
is at 3rd floor an is now called from ground floor,,
when it is travelling towards ground floor it is again called by 3rd floor first and then 2nd floor,,,,,,
so the sequence occur like this---cabinet goes to ground floor it
stays there for 10 sec,,,,then it should move up to 3rd floor ,,,,,
stops there for 10 sec,,,,,and finally comes to 2nd floor and stops..
please help me by sending your ladder diagram which take all this conditions in mind b'coz i m just bugged off thinking about this ,
plzzz
send as soon as possible