Hi,
I have a little problem with a Posmo A 75W. When I use the blocks FB10 and FB11 to control the drive, everything seems to work. I made a profibus connection between the PLC S7-315 2DP, an OP17 and the Posmo A drive. I can control the position with the MDI.
Everything works,
Problem I have, I couldn't communicate with the drive in a direct connection with the Simocom A software. I use a CP5611 card in the PC to connect the Posmo with a profibuscable to the computer (CP5611).
I couldn't communicate, keeps telling me that it can't locate any drives. Communication with the PLC is no problem.
Is there anyone who can help ?
I have a little problem with a Posmo A 75W. When I use the blocks FB10 and FB11 to control the drive, everything seems to work. I made a profibus connection between the PLC S7-315 2DP, an OP17 and the Posmo A drive. I can control the position with the MDI.
Everything works,
Problem I have, I couldn't communicate with the drive in a direct connection with the Simocom A software. I use a CP5611 card in the PC to connect the Posmo with a profibuscable to the computer (CP5611).
I couldn't communicate, keeps telling me that it can't locate any drives. Communication with the PLC is no problem.
Is there anyone who can help ?