Hi all,
I need to communicate with 28 Circutor PMU(Power monitoring unit )using a control logix 1756-L61.
Problem is that these PMU uses MODBUS protocol .
By going through the threads I saw PRO SOFT a product used to convert Ethernet to modbus but it needs 1756-ENET which is not available under communication modules in rockwell website for control logix .
How to proceed any suggestion or help please.
Thanks in advance
I need to communicate with 28 Circutor PMU(Power monitoring unit )using a control logix 1756-L61.
Problem is that these PMU uses MODBUS protocol .
By going through the threads I saw PRO SOFT a product used to convert Ethernet to modbus but it needs 1756-ENET which is not available under communication modules in rockwell website for control logix .
How to proceed any suggestion or help please.
Thanks in advance