Jasondelane
Lifetime Supporting Member
I'm converting some 1336F to Powerflex 700VC, and for some reason I can't get my program to not send a stop command to the drive. It's like the program is not getting the current status from the Powerflex so it won't enable it to run.
Does anyone know right offhand what I might be missing? I've disabled all digital inputs and went through every parameter and I'm still apparently missing something.
The drive is on controlnet via 20-comm-c. I can pull up the drive on CCW and RSLinx, and RSNetworx looks good too.
Does anyone know right offhand what I might be missing? I've disabled all digital inputs and went through every parameter and I'm still apparently missing something.
The drive is on controlnet via 20-comm-c. I can pull up the drive on CCW and RSLinx, and RSNetworx looks good too.