problem with connetion of PLC 200

amirali1

Member
A
Join Date
Oct 2015
Location
TEHRAN
Posts
1
Hi
I was connected to PLC S7 200 by PC adapter in PPI protocol several time but in new machine which it include 224 xp & 216 plc I can’t connected to this PLC .
The wendor of this machine is chains company. I tried to connect whit both rat 9.6 tile 187.5 kb but I was unsuccessful.
Please advise me
 

Similar Topics

M
Cimplicity Operator workstation problem
The project on the operator workstation keeps disconnecting, even though I have an installation server and operating station set up through...
Replies
0
Views
28
MHEDIREKIK
M
J
Problem with AVEVA InTouch Development License and Windows Server
I have a problem, I'm running an AE Licence Manager on a Windows 2016 Server, and my Window Maker is on another separate Windows 2016 Server. My...
Replies
0
Views
41
JWC213
J
P
Old Ansaldo VFD problem
I have one old Ansaldo VFD from 37kW and it have only sign OFF on the display after put it on the 3x400VAC. Is there any idea, how to solve this...
Replies
1
Views
43
jraef
J
C
Can you help me with this problem? (Fibonacci sequence in tia portal)
Hello, I need to write the following program in Ladder language, but I could not integrate the Fibonacci sequence into the ladder. Can you help...
2
Replies
22
Views
492
JesperMP
JesperMP
H
problem in Eplan P8
On all pages of my project i have a lot of information, texts and details that should not not be shown. I can remove them for each part apart from...
Replies
0
Views
68
Haytham_93
H
Back
Top Bottom