boros000
Member
Hello everyone.
I have a strange error on one Proface HMI. I setted up to log the alarms and with an internal memory I'm writing the bank0 errors on a log file to CF card.
The logging is working until I boot the device up again. So when I power it up everything is lost and the last log file is overwritten with the actual errors.
Please help.
I have a strange error on one Proface HMI. I setted up to log the alarms and with an internal memory I'm writing the bank0 errors on a log file to CF card.
The logging is working until I boot the device up again. So when I power it up everything is lost and the last log file is overwritten with the actual errors.
Please help.