sbailey838
Member
Hi all, I'm tasked with adding a list of tags to historian so that they can be monitored, I'm not having any difficulty with global tags, however program tags I cant seem to get the source address correct.
For example, a global tag is set up as the following...
(plant name).(processor name).(tagname)
I tried a few variations with the program tag, such as,
(plant name).(processor name).(program name).(tag name)
AND
(plant name).(program name). (tag name)
I tried reading through the manuals i found online but could not find any topics that mentioned the syntax for program tags.
Just curious if anyone has run into this problem, any help would be appreciated!!
For example, a global tag is set up as the following...
(plant name).(processor name).(tagname)
I tried a few variations with the program tag, such as,
(plant name).(processor name).(program name).(tag name)
AND
(plant name).(program name). (tag name)
I tried reading through the manuals i found online but could not find any topics that mentioned the syntax for program tags.
Just curious if anyone has run into this problem, any help would be appreciated!!