Having trouble with one promicon unit working on a bag making machine. When started cold after about a day the red/green light on the cpu are blinking and we get a warning on the man/machine interface supervisor "pls time out".
We then leave the promicon on for about a hour and switch off the power supply to the unit and re start a few times. The system suddenly starts to work by blinking on the green light only. When swiched off and on again in a short period of time, it works fine, This problem only occurs after a cold state.
If anyone can help, please reply via email to [email protected]
Regards
Murtaza Akbarally
We then leave the promicon on for about a hour and switch off the power supply to the unit and re start a few times. The system suddenly starts to work by blinking on the green light only. When swiched off and on again in a short period of time, it works fine, This problem only occurs after a cold state.
If anyone can help, please reply via email to [email protected]
Regards
Murtaza Akbarally
Last edited:
