lostcontrol
Lifetime Supporting Member
Hi,
We have an application that has a device that goes through a reboot (appears un-graceful)
What then happens is the MVI module appears to hang & comms are stopped.
Issuing a warm boot seems to recover this, so am doing it automatically. Unfortunately, this has some minor issues that we are working through.
What we want to know, is there a way to disable the read commands in PCB via ladder command.?
There is MBTCP.CONTROL.CommandControl.Trigger in the manual, but it is not clear whether this relates to the PCB configured commands or dynamic commands that can be created.
any help/tips appreciated
lc
We have an application that has a device that goes through a reboot (appears un-graceful)
What then happens is the MVI module appears to hang & comms are stopped.
Issuing a warm boot seems to recover this, so am doing it automatically. Unfortunately, this has some minor issues that we are working through.
What we want to know, is there a way to disable the read commands in PCB via ladder command.?
There is MBTCP.CONTROL.CommandControl.Trigger in the manual, but it is not clear whether this relates to the PCB configured commands or dynamic commands that can be created.
any help/tips appreciated
lc