I've a controllogix PLC 1769 that needs to send and receive read write data via modbus to another PLC. I've been able to import the add on instruction. I help in understanding how the controller tags can be allocated for read write on modbus.
Prosoft MVI69L-MBTCP read write data imaging
- Thread starter dpriyank
- Start date
Similar Topics
Hi all.
I have a Modbus ProSoft module in my setup with a capability of 30 clients (0-29), which I'm trying to monitor the Ethernet Connection...
Hi,
We have an application that has a device that goes through a reboot (appears un-graceful)
What then happens is the MVI module appears to hang...
I am working on setting up a Prosoft Datalogger model PLX51-DLplus-232. This unit will be collecting data from a SLC 5/05 on the DB9 port set to...
Hello. I am trying to use a Prosoft AN-X4 to improve the communications for a new panelview plus 7. This is going from a SLC-500 through DH+ to a...
Hi.
I'm using a Modbus ProSoft where I basically map data to a big INT array.
Example, where GX_I_63HPU is a REAL, MNETC.DATA.WriteData[200] an...