Pumpu 5 Duty 1 Standby Logic FBD Language

amruthkiran

Member
Join Date
Jul 2009
Location
India
Posts
6
Dear Sir,

Can anyone give some idea about writing logic for 5 duty 1 standby logic

Following Selection /Cyclic Alteration

P12345 ( Pump1 Duty 1, Pump2 Duty 2, Pump3 Duty3, Pump4 Duty4, Pump5 is standby)

P23451 ( Pump2 Duty 1, Pump3 Duty 2, Pump4 Duty3, Pump5 Duty4, Pump1 is standby)

P34512 ( Pump3 Duty 1, Pump4 Duty 2, Pump5 Duty3, Pump1 Duty4, Pump2 is standby)

P45123 ( Pump4 Duty 1, Pump5 Duty 2, Pump1 Duty3, Pump2 Duty4, Pump3 is standby)
P51234 ( Pump5 Duty 1, Pump1 Duty 2, Pump2 Duty3, Pump3 Duty4, Pump4 is standby)

Please help me and need your advise on how to write with minimum rungs in FBD language.

Thanking you
Amruth Kiran
 

Similar Topics

Hello Friends, I am looking for a way to take my PID Output( it is the result of my PI Algorithm in Real format) and generate a PWM Signal in...
Replies
16
Views
2,511
Just want to make sure my thought process is correct before I proceed. I have a linear actuator with a 3min / 17min duty cycle (3 on, 17 off) I...
Replies
2
Views
1,138
I have an electric actuator with a 75% duty cycle. I am sending an analog output from a PID to a controller board on the actuator. My concern is...
Replies
6
Views
2,419
can anyone help me understand the basic operation of 2 duty and 2 standby Filter bed operation in STP. There will be 2 duty D1 & D2 and 2 Standby...
Replies
0
Views
1,540
Dear all Can any one share me the logic for 2 Pump Duty and 2 Pump Standby as per Running hours selection in RS Logix 5000 Rev 20?
Replies
3
Views
2,050
Back
Top Bottom