PV+400 communication problem

ismeh

Member
I
Join Date
Apr 2010
Location
Dubai
Posts
1
hi

can anyone help me ??
i have PV+400 which i took from site
client has reported there is no data;s were coming from PLC(controllogix)
i am trying to communicate to laptop through DF1 serial cable (straight)
i am unable to establish communication,
I had set communication path in RSenterprise, but its saying Selected source is not valid.
did i miss anything

help me out in this issue
 

Similar Topics

D
ML1100 and PV400+
I want to use DF1 to communicate between my ML1100 (1763-L16BBB) and a PV400+ (2711P-K4M5D). Is there a standard cable I can buy to do this? I...
Replies
2
Views
1,668
DaveW
D
dalporto
ProSoft MVI56E-MNETC Client Communication monitoring
Hi all. I have a Modbus ProSoft module in my setup with a capability of 30 clients (0-29), which I'm trying to monitor the Ethernet Connection...
Replies
0
Views
31
dalporto
dalporto
F
Modbus TCP communication
Hi folks, I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Replies
6
Views
158
Contr_Conn
Contr_Conn
T
TIA Portal 15.1. and fanuc SR-6iA Communication
Hello, i am using profibus as communication between plc and fanuc arm. I can easily send inputs from plc to arm, but i can't monitor any outputs...
Replies
0
Views
45
Tinx12
T
S
Communication not done between Woodward controller and PhoenixIO
I have Woodward Controller EASYGEN-3500XT and Phoenixcontact make IO CAN-CUPLER part no: 2702230, Analog Input card: 2861412, Analog Output Card ...
Replies
0
Views
47
Sandeep Patel
S
Back
Top Bottom