Pyromat Plus 300(temp controller)

scatter17

Member
S
Join Date
Aug 2006
Location
manila
Posts
16
We have a project to communicate Siemens S7 plc using CP341 to Pyromat Plus 300 (Temp controller). We need to know the protocol used by this instrument and we don't have the manual..So does anyone have experiences in programming this temp controller? and we need also the communication/operation manual of Pyromat Plus 300?Please email us at [email protected]..
We much appreciated your help.Thanks
 

Similar Topics

D
I buy surplus PLCs, automation controls, industrial and MRO.
What's the best way to connect with more suppliers?
Replies
0
Views
71
Devlin
D
D
Help with TCSEGDB23F24FA M340 Modbus Plus Proxy Module
Hi Everyone, i was hoping for a little help with this module. i have data that needs to be read from a different plc through the Modbus plus...
Replies
11
Views
238
davexr
D
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
97
jscampbell210
J
C
Adding PanelView Plus 7 to the network
Hi Everyone, Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Replies
0
Views
60
celso3093
C
EICS
ABB PS501 Control Builder Plus V2.3 Install - anyone use it or know of it
does anyone have an install or know if/where i can download it for the following "ABB PS501 Control Builder Plus V2.3 " the software was a free...
Replies
2
Views
92
ojz0r
O
Back
Top Bottom