Question

I would have thought that the higher priority here was to not give the OP (apparent student) any complete solutions. That's one redundant thought at this stage.

A "Welcome to the Forum!" wouldn't go astray here either.

But don't mind me. I'll probably be chewing out some other perceived presumptious student before the week is out.

Skitters and scholars, as you were.

apologies for the hijack ..
 
Is this a test question? why not 2 timers.
That way you can even adjust on time and off time?
on delay and off delay..1.5 sec example.

Pulse BIt Timer ME RX3i.jpg
 

Similar Topics

Hello all, I have a servo turning a small table on a machine I'm programming. I found that after a day the home position was getting off by a...
Replies
1
Views
29
Hi, I just upgraded just restored a ftview hmi data and the trend file have question marks with no lines in the graph. How do i fix this?
Replies
0
Views
11
Hey all, simple question. Once I create a Macro in my Factory Talk Project, do I need to trigger the macro to run somehow? Or are all macros...
Replies
7
Views
76
I recently uploaded an aplication from a Panel View, created a new screen and now that I've downloaded it to the Panel View, all the texts have...
Replies
9
Views
173
I have never had the pleasure of working with a "Thermistor" until now and have a question. The Thermistor is a 10KOhm 4-20mA 2-wire device and I...
Replies
4
Views
161
Back
Top Bottom