Read BECKHOFF OPC UA historian with indusoft

Iman

Member
Iman
Join Date
Jul 2010
Location
Tehran
Posts
172
Hi guys,
I've implemented OPC UA server in a BECKHOFF Cx8090 controller.
Also, there is a tag with historian setting of BECKHOFF OPC UA. With this setting I can save the data of the tag in the controller.

I can read the real time data and historian data with UA Expert (UA Client) without any problem.:cool:

But in Indusoft Webstudio V8.0 ,I can only read the real time data through OPC UA and I couldn't find any method to read the historian data (Saved data) of a tag from controller.:confused:
Is there any solution to read the OPC UA historian from controller with Indusoft Webstudio?đź“š
 

Similar Topics

D
Beckhoff CX5020-0120-M310 can't read data from Siemens 1SI RS232 on ET 200s
Hi i have Beckhoff (CX5020-0120-M310) (profibus master) with TC3.1 and want communicate with Siemens Profibus ET 200S (IM151) DPV1. All modules...
Replies
1
Views
1,703
sigmadelta
S
G
How to read BECKHOFF Module Channel Addresses in Simatic manager
Dear experts, recently I working on Automation with Siemens PLC (CPU 315-2DP)and Profibus Networks, all profibus nodes: Beckhoff bus coupler...
Replies
0
Views
968
glongo
G
J
Read and display Phoenix Contact UPS variables in Beckhoff PLC
I am using a Phoenix Contact UPS (QUINT USP) and I want to display information about the UPS state (battery charge percentage for example) in the...
Replies
6
Views
3,813
karlek
karlek
N
Beckhoff ADS Read Tag properties
Hello all: I am in the process of writing some drivers on a PC that will communicate with a Beckhoff PLC via AMS/ADS :banghead: . I can request a...
Replies
9
Views
4,661
NevisGroup
N
D
how to read Beckhoff EK1100 coupler state using dot net
May I know how to read the coupler state, whether it is in Idle or in active mode using dot net. What variable I should read? Any sample I can...
Replies
0
Views
1,364
derickloo
D
Back
Top Bottom