Read more parameters of a VFD 525 and display them on a Time Series

[LuisR2D2]

Hello hope you are doing well! I wan to read the next parameters of a VFD 525:

• 
  1. Output Current
  2. Average Power
  3. Energy Saved
  

to display them in a time series, however I don't know how to add them to the "Controller Tags" SECTION.
Will you help me out please?

 

[dmroeder]

How you do it depends a bit on what version, the drive tabs are organized different. In my version:

Open a drive, click Device Definition, Connection Format, pick new parameters on the input tab.

 

[dmroeder]

Edit: Double post

 

[JaxGTO]

I believe you can read multiple parameters from it using a message instruction. Search AB Knowledge base for what registers to read. The passed parameters are limited.

 

[dmroeder]

Sure can. GetAttributeSingle, class 0x93, instance parameter number, attribute 0x09

 

[joseph_e2]

There's a user manual for the embedded Ethernet adapter:
https://literature.rockwellautomation.com/idc/groups/literature/documents/um/520com-um001_-en-e.pdf
The section on Explicit Messaging was very helpful. You can read a single parameter or do a scattered read of multiple parameters.