read/write tags using class3 connection

Shubham Tiwari

Member
S
Join Date
Jan 2023
Location
Hyderabad
Posts
1
How to read/write tags using class3 connection with omron Nx/Nj Plc?

when i am seeing wireshark packets for my existing connection its shows as unconnected read.
 

Similar Topics

G
Can I read/write tags via SendRRData instead of SendUnitData ?
Hi, Based on other information on the web, my A-B driver currently initiates a session with an SLC or MicroLogix as follows: Step 1 - Register...
Replies
1
Views
2,178
AlfredoQuintero
A
D
Read/Write vs Read only defaults in RS5000 tags
Hi all. I set a tag to read only while creating a program in RSLX5000. Since then, all newly created tags have read-only as the default...
Replies
0
Views
1,454
DairyBoy
D
W
  • Poll
Read and Write to Local IO Tags Within a FOR Loop
So, I'm almost certain there is no great answer to this question, but I thought I would poll the masses for expert opinion... I'm running a...
2
Replies
23
Views
13,449
FrancisL
F
L
Citect & CJ1M read tags ok Write tags ng
Hi plc.net I have Citect 7.2 connected to an Omron CJ1M etn 21 over Ethernet using OMFINS. Reading tags is not a problem, but writing to them is...
Replies
7
Views
7,558
Dua Anjing
Dua Anjing
A
Read/Write To RFID Tags
Hello, I need some assistance in some programming. I have an application where I need to read/write to some AB RFID tags. The tags have 2k...
Replies
1
Views
2,626
a.schmidt
A
Back
Top Bottom