Remplace CPU-6ES5-921-3W14 by 6ES5-922- 3UA11

alan1968

Member
A
Join Date
Mar 2012
Location
Tournai
Posts
12
hello,
I have a machine tool HS, CPU-6ES5-921-3W14 (1982) sinumerik is defective, I have in stock the simatics 135U CPU 6ES5-922-3UA11 (1991), I place a card and inject the program but I have a problem with the db1,apparently addressing the i/o it's not the same

Thy can do this?

THX!

Alan
 

Similar Topics

Z
PLC CPU Unit Upgrade
Hello all, I have a one problem. I would like to upgrade Mitsubishi PLC Q02 to Q03UDVCPU. I have Q02 program and I change to PLC type and try to...
Replies
7
Views
135
parky
P
M
DL205-1 CPU Monitoring
Hello everyone! I need to connect to a DL205-1 CPU and, as far as I know, I need to use DirectSOFT 6 software for the connection. Is anyone...
Replies
1
Views
67
bernie_carlton
bernie_carlton
C
How to Time Sync? S7-400H CPU (Time Master) With Wincc Runtime V7.5(Time Slaves)
hello s7-400h and wincc are connected to each other via Ethernet. I need help on how to do time synchronization
Replies
0
Views
62
Controller5848
C
C
Mitsubishi R08SFCPU and RD78G8 communication to FR-E800SCE (Safety Version) on CC-link IE TSN
I'm struggling to get an FR-E800SCE to work on CC-Link IE TSN. I'm sure the issue is with the drive, when I plug in the network cable I get no...
Replies
1
Views
110
cottagewood
C
S
Hi , Where i can find Mitsubishi PLC Card end of line & replacement model details. i am looking for Q02CPU replacement model. Please advice. thanks
Hi , Where i can find Mitsubishi PLC Card end of line & replacement model details. i am looking for Q02CPU replacement model. Please advice. thanks
Replies
2
Views
142
Sundar4163
S
Back
Top Bottom