Dcook87
Member
I'm starting to learn some basic ladder logic. I'm on an AB Micrologix 1000 PLC.
I'm wondering if the OTU instruction will work on an entire bit-word rather than a single bit.
i.e.:
Will "OTU B3:2" reset all bits (0-15) in word B3:2 to 0, or would I have to go through and do an "OTU B3:2/0, OTU B3:2/1..." for all the bits I want to reset?
I would just try this out, but I don't have access to a PLC at the moment.
I'm wondering if the OTU instruction will work on an entire bit-word rather than a single bit.
i.e.:
Will "OTU B3:2" reset all bits (0-15) in word B3:2 to 0, or would I have to go through and do an "OTU B3:2/0, OTU B3:2/1..." for all the bits I want to reset?
I would just try this out, but I don't have access to a PLC at the moment.