phil hughes
Lifetime Supporting Member
- Join Date
- May 2005
- Posts
- 31
Any issues flashing our logix processor directly from version 6.3 to version 16
RS logix 5000 v6.3
- Thread starter phil hughes
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
I agree; check the model number carefully and compare it to the firmware relases on the update website:
http://support.rockwellautomation.com/ControlFlash/
If it's really a Version 6 controller, it is not a model that can be upgraded to V16. RA's "Step Forward" program is intended for exactly this sort of migration from older hardware to newer hardware.
http://support.rockwellautomation.com/ControlFlash/
If it's really a Version 6 controller, it is not a model that can be upgraded to V16. RA's "Step Forward" program is intended for exactly this sort of migration from older hardware to newer hardware.
Similar Topics
I recently did a program conversion from logix 500 to studio 5000 and when machine runs it depends on two ton instructions to keep the machine in...
Hello,
I am trying to read a barcode scanner input using a cognex dataman 280 barcode reader, store it another string, the compare with another...
Hello. Why is my RSLogix 5000 start in grace period mode, even though I have a valid license? I also think I have a decently recent FT Activation...
Hi folks, in the alarm manager of Rslogix 5000, the tag-based alarm has been created. But when I tried to change the condition, it was found the...
