jasil Member J Join Date Jun 2012 Location Building Posts 48 Jun 18, 2019 #1 Please, oh wiser folks than me, explain this and how it works.
Ken Moore Lifetime Supporting Member Join Date May 2004 Location North, West, South Carolina Posts 3,480 Jun 18, 2019 #2 First one: Starting at N49:12 copy 15 registers to N[Value stored in N48:0]:[Value stored in N48:39] So if N48:0 was 13, and N48:39 was 0, then the destination would be N13:0 plus the next 14 registers.
First one: Starting at N49:12 copy 15 registers to N[Value stored in N48:0]:[Value stored in N48:39] So if N48:0 was 13, and N48:39 was 0, then the destination would be N13:0 plus the next 14 registers.
jasil Member OP J Join Date Jun 2012 Location Building Posts 48 Jun 18, 2019 #3 Awesome I would tip you if I could any help on the second one? Last edited: Jun 18, 2019
Ken Moore Lifetime Supporting Member Join Date May 2004 Location North, West, South Carolina Posts 3,480 Jun 18, 2019 #4 Same concept, plug in the numbers held in the two registers to get the final F: address.
Ron Beaufort Lifetime Supporting Member Join Date Jul 2002 Location Charleston, SC Posts 5,701 Jun 18, 2019 #5 this old post might be useful ... http://www.plctalk.net/qanda/showthread.php?p=632294&postcount=23 especially the part shown in the red circle ...
this old post might be useful ... http://www.plctalk.net/qanda/showthread.php?p=632294&postcount=23 especially the part shown in the red circle ...
jasil Member OP J Join Date Jun 2012 Location Building Posts 48 Jun 18, 2019 #6 Ron and Ken thanks again the file/address piece was confusing that thread made it crystal clear. Appreciate the help. These older PLC 5's kill me sometimes.
Ron and Ken thanks again the file/address piece was confusing that thread made it crystal clear. Appreciate the help. These older PLC 5's kill me sometimes.
rupej Member R Join Date Sep 2014 Location NC Posts 967 Jun 18, 2019 #7 Just so you know, the same functions exist for Logix 500 and 5000, so you're sure to see them there as well.
Just so you know, the same functions exist for Logix 500 and 5000, so you're sure to see them there as well.