zwillhoite
Member
Hello,
I'm new to this board and i'm having some troubles with RS Logix 500 v.6.00.00. As a background i work for a public transit agency, with about 300 buses, and probally around half of those use Allen Bradley SLC 5/01 PLC's with the 1747-PIC.
Anyway, with the last round of security updates that microsoft put out, we upgraded the laptop that had the RSlogix installed to SP3, and promptly found out that we could no longer talk to the PLC. So after trying to uninstall and reinstall the software to no avail, we removed SP3 and installed SP2 to try again, and still are not able to get it to work. In RSLogix we get the error "Diagnostic Status Failed 0x7". RSLinx seems to work but cant seem to see the PLC (althought it will see itself).
Any ideas?
I'm new to this board and i'm having some troubles with RS Logix 500 v.6.00.00. As a background i work for a public transit agency, with about 300 buses, and probally around half of those use Allen Bradley SLC 5/01 PLC's with the 1747-PIC.
Anyway, with the last round of security updates that microsoft put out, we upgraded the laptop that had the RSlogix installed to SP3, and promptly found out that we could no longer talk to the PLC. So after trying to uninstall and reinstall the software to no avail, we removed SP3 and installed SP2 to try again, and still are not able to get it to work. In RSLogix we get the error "Diagnostic Status Failed 0x7". RSLinx seems to work but cant seem to see the PLC (althought it will see itself).
Any ideas?