JustinDanBruce
Member
I know how to export an entire routine, and how to export tags, however, i wanted to know if there is a way that you can export the tags with an OTE only.
We had a problem at a plant that made us lose a ton of tag descrtipons and instead of going rung by rung on 20 PLCs, i want to just export the tags that have a coil so I can narrow down which descriptions are needed immediately.
-thanks
We had a problem at a plant that made us lose a ton of tag descrtipons and instead of going rung by rung on 20 PLCs, i want to just export the tags that have a coil so I can narrow down which descriptions are needed immediately.
-thanks