ya.. is lad68 even ran? Not a silly question Steven.. gotta start with the basics first. Sometimes it's the simple things.
maybe it't too quick to see.. 165 hundreths of a second
The rung with your JSR on should always be true unless you want to jump to that subroutine only when an event occurs.
See Image
I think the point of the timer is that once the photo eye's light beam is blocked, if it turns off then on again within 1.65 seconds, it means a box was stuck to the one in front of it.
The logic for the timer looks sound. I don't see (or maybe don't understand) how your suggestions would work the same way as his method does.
i see that mark has only rung 0000 and 0001 (end) where would i be putting that new rung? before the end at the end i have already? i have 0095 rungs in lad2 where would i put the new JSR instruction and "end" instruction exactly?Hello there showshocka in lad2 - JSRS add at the bottom a new rung and add a JSR instruction click the new instruction and put in the number 68 as Mark has demostrated that is what you need to add at the end.