I've been having the worst time trying to get my version 20 5000 to load.
But I have to give some background information first. What I did to get myself in this situation is this:
We got a few new pieces of Equipment sent to us that required a version update from 19 to 20 on RSLogix 5000. I also had to bump up my RSView Studio to 7.00. I believe at this point I checked both to see if there was any issue and I didn't see any.
After that I was given RSNetworX version 9 (so CPR9 SR6) and RSLinx 3.6 (also CPR9 SR6). After installing these and upgrading my FactoryTalk Platform to SR6 nothing worked anymore.
I tried to install the New RSStudio ver 21 (which is to replace RSLogix 5000) and I was told not to be our AB Rep. He is now telling me that the problem exists in Version 3.6 RSLinx. DO NOT INSTALL THIS VERSION according to AB. Everything that is required is available in RSLinx 2.59 (or CPR9 SR5)
But I have to give some background information first. What I did to get myself in this situation is this:
We got a few new pieces of Equipment sent to us that required a version update from 19 to 20 on RSLogix 5000. I also had to bump up my RSView Studio to 7.00. I believe at this point I checked both to see if there was any issue and I didn't see any.
After that I was given RSNetworX version 9 (so CPR9 SR6) and RSLinx 3.6 (also CPR9 SR6). After installing these and upgrading my FactoryTalk Platform to SR6 nothing worked anymore.
I tried to install the New RSStudio ver 21 (which is to replace RSLogix 5000) and I was told not to be our AB Rep. He is now telling me that the problem exists in Version 3.6 RSLinx. DO NOT INSTALL THIS VERSION according to AB. Everything that is required is available in RSLinx 2.59 (or CPR9 SR5)