Rslogix

[gm52195]

I have purchased RSLogix 500 software with 3 disks and one floppy master disk. One disk says Version 4.50.00 and one says Version 7.00.00 and one says Hardware Configuration and RSLinx Documentation. And the floppy is a Master key. It has been awhile since I did this, but I would like to know in which order do I install these. I know this must be a dumb question but I would like to do it right. Or does it matter at all in which order. I am wanting to install these on a new desk top HPXP. Thanks!!!!

 

[geniusintraining]

7.0 then at the end of the install you will have a check box asking if you want to install the Key... or you can do it later

 

[boiler-todd]

Don't forget to install the RSLINX as well. That should be on one of your disks. Also, if the Master Disk doesn't have a key on it that can be transferred, then you could always leave the disk in the floppy drive. It will act as a key as well.

Thanks,

Todd.