Hi All. Yes, I know I'm just adding to the vast bulk of pid questions but searching through them was becoming a pain.
Quote from the help file:
You can set an output limit (percentage of output) on the control output. When the instruction detects that the output has reached a limit, it sets an alarm bit and prevents the output from exceeding either the lower or upper limit.
So: Are they referring to .MINO & .MAXO and the associated alarm bits .OLL & .OLH?
Thanks.
Quote from the help file:
You can set an output limit (percentage of output) on the control output. When the instruction detects that the output has reached a limit, it sets an alarm bit and prevents the output from exceeding either the lower or upper limit.
So: Are they referring to .MINO & .MAXO and the associated alarm bits .OLL & .OLH?
Thanks.