I want to measure temperature using two digital inputs.
The temperature time module outputs a value in BCD every second. The 13 pulses are transfered in 18ms . The pulses are o.2ms long.
There is an sample on the next link:
http://blokl.nl/~lblok/plc/tip45b.doc
This won't work, does anybody know what's wrong, or is there an other solution.
Thx.
The temperature time module outputs a value in BCD every second. The 13 pulses are transfered in 18ms . The pulses are o.2ms long.
There is an sample on the next link:
http://blokl.nl/~lblok/plc/tip45b.doc
This won't work, does anybody know what's wrong, or is there an other solution.
Thx.