Ken Moore
Lifetime Supporting Member
Hey,
Plan on migration of a S7-313 from Step-7 5.6 to TIA 15.1
It has a MP377 12"Touch HMI and they are very expensive to replace, over 12,000 USD. A TP1500 is 25% of that.
Instead of doing only the HMI, we are going to migrate the entire project. I have done the migration in TIA, but I lost all my comments. The symbols migrated, no issue. Both old and new projects have English as primary language.
Is there anyway to export from old to new?
Plan on migration of a S7-313 from Step-7 5.6 to TIA 15.1
It has a MP377 12"Touch HMI and they are very expensive to replace, over 12,000 USD. A TP1500 is 25% of that.
Instead of doing only the HMI, we are going to migrate the entire project. I have done the migration in TIA, but I lost all my comments. The symbols migrated, no issue. Both old and new projects have English as primary language.
Is there anyway to export from old to new?