Mrneverwhere
Member
Hello, iam a newbie in wincc operations.
But I am a hard/soft engineer.
In my father'r company, they have used a wincc based project to monitor the production process.
The PC with wincc project recently died. So we managed to save the project from the hard drive but nothing else.
On the new PC, we have a fresh install of windows xp, wincc 6.2 sp2 and all the PC drivers.
I have set the network adapter ip address in the same range as plc's
10.0.0.1....0.0.7 since we have 7 plc's
When I open the project, and activate runtime...I can no longer see plc-s
Do I have to set opc server and so and so or I can talk directly with plc-s...what am I missing.
Thanx for help in advance
But I am a hard/soft engineer.
In my father'r company, they have used a wincc based project to monitor the production process.
The PC with wincc project recently died. So we managed to save the project from the hard drive but nothing else.
On the new PC, we have a fresh install of windows xp, wincc 6.2 sp2 and all the PC drivers.
I have set the network adapter ip address in the same range as plc's
10.0.0.1....0.0.7 since we have 7 plc's
When I open the project, and activate runtime...I can no longer see plc-s
Do I have to set opc server and so and so or I can talk directly with plc-s...what am I missing.
Thanx for help in advance