Ones_Zeros
Member
Hey Guys,
I have a scaling issue in Wonderware?
What I have is a raw value coming from
A Totalflow meter, I poll this meter in a TDS
software.
When I poll this meter in TDS, I get the correct
value of 0.0432, but when I read this value
Into Wonderware I get a wrong value of 4.32
I have my scaling set as
Min raw = 0
Max raw = 100
Min EU = 0
Max EU = 100
How would I scale this?
Is there a proper way to determine the scaling?
Thanks for helping
I have a scaling issue in Wonderware?
What I have is a raw value coming from
A Totalflow meter, I poll this meter in a TDS
software.
When I poll this meter in TDS, I get the correct
value of 0.0432, but when I read this value
Into Wonderware I get a wrong value of 4.32
I have my scaling set as
Min raw = 0
Max raw = 100
Min EU = 0
Max EU = 100
How would I scale this?
Is there a proper way to determine the scaling?
Thanks for helping
Last edited: