Schneider HMIGXO5502 with different PLCs

fadiking2003

Member
F
Join Date
Sep 2017
Location
turkey
Posts
2
Hello, i am trying to connect Schneider HMIGXO5502 HMI to a Delta PLC using rs232 or rs485.
I don't know if that is possible or no , or the HMI can be connected only to a specific types of PLCs ??
 
You should have no problem with that. Just configure your devices the same way. But it depends on what those devices offer for communication. You should also be able too use Modbus TCP/IP.
 

Similar Topics

C
Schneider Modicon M221 & Machine Expert Basic Programming Application
Hello All, I am stumped on how to convert a %MW to a %MF using Machine Expert Basic and a Modicon M221. The help files show a word to a double...
Replies
0
Views
27
ControlSystems
C
R
Schneider Control Expert Multiple Monitors
Hi, Is Control Expert V15.0 supposed to support multiple monitors? I'm running Control Expert V15.0 on my host Windows 11 PC, connected to two...
Replies
1
Views
64
dalporto
dalporto
K
Schneider Modicon Premium TSX P57203Controller issue
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Replies
0
Views
63
[email protected]
K
S
NTP for Schneider M580/M340
Hello all, I am wanting to update the system clock via NTP in the M580/M340. I'm aware that we are able to connect to a NTP in the controller...
Replies
4
Views
169
S.Woollett
S
M
Pack drive elau Schneider ISH-100
I am using Schneider elau pack drive servo motor ISH-100. I am facing the problem that On the ISH -100 red light is blinking and pack drive C-600...
Replies
0
Views
86
Munish
M
Back
Top Bottom